Select Page

Specialty Products For Hydronic Systems

  • Condensate Neutralizers

    Condensate fluid that is formed inside fuel...read more

    Condensate Neutralizers

    Condensate fluid that is formed inside fuel burning appliances is acidic and has the potential to harm the environment and drainage systems. Axiom condensate neutralizers:

    • Raise the pH level of the acidic condensate to a more neutral level which:
      • Prevents acidic fluid from damaging drains, sewer systems and concrete
      • Helps maintain a safe environment for bacteria in septic systems
    • Made with corrosion resistant materials for long term durability
    • Tanks and capsules come with connection hardware kits
    • Includes an initial charge of Axiom’s unique blend of LipHter+ neutralizing media

    NC-1

    MODEL NC-1 ‘NeutraPal’ CONDENSATE NEUTRALIZATION KIT

    The ‘NeutraPal’ is ideal for neutralizing condensate from condensing boilers and furnaces operating on natural gas or propane. The condensate is acidic and has the potential to harm the environment and the sewer system. The NeutraPal will raise the pH of the condensate to a more neutral level before it is discharged to drain.

    FEATURES and BENEFITS

    • 1.6 Gal/hr (6.05l/hr)
    • NeutraPal prevents acidic condensate from corroding drains and sewer systems
    • Neutralized condensate is more environmentally friendly
    • Fast and easy installation, includes piping and connection hardware
    • Helps maintain a neutral environment for bacteria in septic systems
    • Low profile design for appliances with a near floor condensate drain
    • All corrosion resistant materials
    • Suitable for use on all types of Natural Gas and Propane appliances
    • Includes initial charge of LipHter+ neutralizing agent
    • Can be mounted in horizontal or vertical position (see installation instructions)

    * Check with the appliance manufacturer for condensate flowrate. As a guideline 400,000 BTU/hr at 93% efficiency will produce approximately 1.6 Gal/hr.

    NC-1S

    MODEL NC-1S STREAKER ‘NeutraPal’

    CONDENSATE NEUTRALIZATION KIT The ‘NeutraPal’ is ideal for neutralizing condensate from condensing boilers and furnaces operating on natural gas or propane. The condensate is acidic and has the potential to harm the environment and the sewer system. The NeutraPal will raise the pH of the condensate to a more neutral level before it is discharged to drain.

    FEATURES and BENEFITS

    • 1.6 Gal/hr (6.05l/hr)
    • NeutraPal prevents acidic condensate from corroding drains and sewer systems
    • Neutralized condensate is more environmentally friendly
    • Fast and easy installation, includes ¾” PVC Socket Weld Adaptors for hard pipe installation
    • Helps maintain a neutral environment for bacteria in septic systems
    • Low profile design for appliances with a near floor condensate drain
    • All corrosion resistant materials
    • Suitable for use on all types of Natural Gas and Propane appliances
    • Includes initial charge of LipHter+ neutralizing agent
    • Can be mounted in horizontal or vertical position (see installation instructions)

    * Check with the appliance manufacturer for condensate flowrate. As a guideline 400,000 BTU/hr at 93% efficiency will produce approximately 1.6 Gal/hr.

    NC-1W

    MODEL NC-1W ‘NeutraPal’WALL HUNG CONDENSATE NEUTRALIZER

    The ‘NeutraPal’ is ideal for neutralizing condensate from condensing boilers and furnaces operating on natural gas or propane.

    The condensate is acidic and has the potential to harm the environment and the sewer system. The NeutraPal will raise the pH of the condensate to a more neutral level before it is discharged to drain.

    FEATURES and BENEFITS

    • 1.6 Gal/hr (6.05l/hr)
    • NeutraPal prevents acidic condensate from corroding drains and sewer systems
    • Provisionally patented manual reset float system indicates if the unit has become restricted
    • Integral bypass feature prevents condensate backflow into appliance
    • Neutralized condensate is more environmentally friendly
    • Reversible for fast and easy installation
    • Helps maintain a neutral environment for bacteria in septic systems
    • All corrosion resistant materials
    • Suitable for use on all types of Natural Gas and Propane appliances
    • Includes initial charge of LipHter+ neutralizing agent

    * Check with the appliance manufacturer for condensate flowrate. As a guideline 400,000 BTU/hr at 93% efficiency will produce approximately 1.6 Gal/hr.

    NC-2

    MODEL NC-2 ‘NeutraPal’ CONDENSATE NEUTRALIZATION KIT

    The ‘NeutraPal’ is ideal for neutralizing condensate from condensing boilers and furnaces operating on natural gas or propane. The condensate is acidic and has the potential to harm the environment and the sewer system. The NeutraPal will raise the pH of the condensate to a more neutral level before it is discharged to drain.

    FEATURES and BENEFITS

    • 4.0 Gal/hr (15.1 l/hr)
    • NeutraPal prevents acidic condensate from corroding drains and sewer systems
    • Neutralized condensate is more environmentally friendly
    • Fast and easy installation
    • Helps maintain a neutral environment for bacteria in septic systems
    • Low profile design for appliances with a near floor condensate drain
    • All corrosion resistant materials
    • Suitable for use on all types of Natural Gas and Propane appliances
    • Includes initial charge of LipHter neutralizing agent
    • Can be mounted in horizontal or vertical position (see installation instructions)

    * Check with the appliance manufacturer for condensate flowrate. As a guideline 1,000,000 BTU/hr at 93% efficiency will produce approximately 4.0 Gal/hr. Sizing guideline available on website (www.axiomind.com).

    NC-2S

    MODEL NC-1S STREAKER ‘NeutraPal’ CONDENSATE NEUTRALIZATION KIT

    The ‘NeutraPal’ is ideal for neutralizing condensate from condensing boilers and furnaces operating on natural gas or propane. The condensate is acidic and has the potential to harm the environment and the sewer system. The NeutraPal will raise the pH of the condensate to a more neutral level before it is discharged to drain.

    FEATURES and BENEFITS

    • 1.6 Gal/hr (6.05l/hr)
    • NeutraPal prevents acidic condensate from corroding drains and sewer systems
    • Neutralized condensate is more environmentally friendly
    • Fast and easy installation, includes ¾” PVC Socket Weld Adaptors for hard pipe installation
    • Helps maintain a neutral environment for bacteria in septic systems
    • Low profile design for appliances with a near floor condensate drain
    • All corrosion resistant materials
    • Suitable for use on all types of Natural Gas and Propane appliances
    • Includes initial charge of LipHter+ neutralizing agent
    • Can be mounted in horizontal or vertical position (see installation instructions)

    * Check with the appliance manufacturer for condensate flowrate. As a guideline 400,000 BTU/hr at 93% efficiency will produce approximately 1.6 Gal/hr.

    NT15

    MODEL NT15 CONDENSATE NEUTRALIZATION TANK

    The NT15 is ideal for neutralizing condensate from condensing boilers and furnaces operating on natural gas or propane.

    The condensate produced by these appliances is acidic and has the potential to harm the environment and the sewer system. The NT15 will neutralize the condensate to a more neutral pH level before it is discharged to drain.

    FEATURES and BENEFITS

    • Up to 20 Gal/hr (75 l/hr) or 30 Gal/hr (114 l/hr)with two in series*
    • NeutraPro prevents acidic condensate from corroding drains and sewer systems
    • Neutralized condensate is more environmentally friendly
    • Two piping configurations for fast and versatile installation
    • Low profile design for appliances with near floor condensate drain
    • Tank and lid made from durable and corrosion resistant polypropylene
    • 14 liter (3.5 US gallon) tank with baffles designed to channel flow through LipHter media for complete neutralization
    • Integral bypass feature prevents condensate backflow into appliance
    • Includes initial charge of Axiom’s special LipHter neutralizing media

    * Check with the appliance manufacturer for condensate flowrate or go to our website and use the sizing calculator. As a guideline 3,000,000 BTU/hr at 96% efficiency will produce approximately 20 Gal/hr (75 l/hr) and 4,500,000 BTU/hr at 96% efficiency will produce approximately 30 Gal/hr (114 l/hr).

    NT25

    MODEL NT25 CONDENSATE NEUTRALIZATION TANK

    The NT25 is ideal for neutralizing condensate from condensing boilers and furnaces operating on natural gas or propane.

    The condensate produced by these appliances is acidic and has the potential to harm the environment and the sewer system. The NT25 will neutralize the condensate to a more neutral pH level before it is discharged to drain.

    FEATURES and BENEFITS

    • 45 Gal/hr (170 l/hr) or 80 Gal/hr (300 l/hr)with two in parallel*
    • NeutraPro prevents acidic condensate from corroding drains and sewer systems
    • Neutralized condensate is more environmentally friendly
    • Two 1” NPT inlet/outlet connections with unions for fast and versatile installation
    • Low profile design for appliances with near floor condensate drain
    • Tank and lid made from durable and corrosion resistant Polypropylene
    • 18 liter (4.8 US gallon) tank with baffles designed to channel flow through LipHter media for complete neutralization
    • Integral bypass feature prevents condensate backflow into appliance
    • Includes initial charge of Axiom’s special LipHter neutralizing media

    * Check with the appliance manufacturer for condensate flowrate or go to our website and use the sizing calculator. As a guideline 7,000,000 BTU/hr at 96% efficiency will produce approximately 45 Gal/hr (170 L/hr) and 12,000,000 BTU/hr at 96% efficiency will produce approximately 80 Gal/hr (300 L/hr).

    NT1-P

    MODEL NT1-P CONDENSATE NEUTRALIZATION TANK WITH PUMP

    The NT1-P is ideal for installations that require both condensate removal and neutralization. The condensate produced by gas fired condensing appliances is acidic and has the potential to harm the environment and the sewer system.

    FEATURES and BENEFITS

    • 7.2 l/hr (1.9 Gal/hr)*
    • Maximum delivery head 6m (20ft)
    • High level float with N.C. or N.O. contacts (factory set to N.C.) for hook up to alarm system
    • NeutraPump prevents acidic condensate from corroding drains and sewer systems
    • Neutralized condensate is more environmentally friendly
    • Low profile design for appliances with near floor condensate drain
    • All materials made from corrosion resistant material
    • 4 liter (1 US gallon) tank with baffles designed to channel flow through LipHter+ media for complete neutralization
    • Includes initial charge of Axiom’s special LipHter+ neutralizing media

    * Check with the appliance manufacturer for condensate flowrate or go to our website and use the sizing calculator. As a guideline 500,000 BTU/hr at 93% efficiency will produce
    approximately 7.2 l/hr (1.9 Gal/hr).

    NT25-P18

    MODEL NT25-P18 CONDENSATE NEUTRALIZATION TANK WITH PUMP

    The NT25-P18 is ideal for installations that require both condensate removal and neutralization.

    The condensate produced by gas fired condensing appliances is acidic and has the potential to harm the environment and the sewer system.

    FEATURES and BENEFITS

    • 40 Gal/hr (150 l/hr)*
    • 18 feet of lift at max design flow rate
    • Comes with high level float for hook up to alarm system
    • NeutraPump prevents acidic condensate from corroding drains and sewer systems
    • Neutralized condensate is more environmentally friendly
    • Low profile design for appliances with near floor condensate drain
    • All materials made from corrosion resistant material
    • 18 liter (4.8 US gallon) tank with baffles designed to channel flow through LipHter media for complete neutralization
    • Includes initial charge of Axiom’s special LipHter neutralizing media

    * Check with the appliance manufacturer for condensate flowrate or go to our website and use the sizing calculator. As a guideline 6,000,000 BTU/hr at 96% efficiency will produce approximately 40 Gal/hr (150 L/hr).

    NT70-P

    Condensate Transfer and Neutralization Package: NT70-P

    The condensate transfer and neutralization package shall include:

    Specification:

      • Condensate transfer pump (NT70-TP): 25 litre (6.6 U.S. gallon) tank, 125 mm (5”) fill/access opening and cover; pump with thermal cut-out and electrically certified to CAN/CSA std C22.2 no. 108-1 (conforms to UL std 778), 3/4” check valve, 3/4” ball valve with unions, 3/4”FNPT outlet connection, and adjustable float switch, adjustable high level alarm (N.O./N.C. depending on mounting direction).
      • NT70 neutralization tank: 1-1/2” FIP inlet,72 litre (19.4 U.S. gallons) tank and lid made from LLDPE construction with two 1-1/2” FNPT inlet/outlet connections adjustable high level alarm (N.O./N.C. depending on mounting direction). Comes with 78 kg (170 lbs) of Axiom’s LipHter neutralization media. Each tank can neutralize up to 2.2 gpm (8.4 L/min) of condensate. Check with the appliance manufacturer for condensate flowrate. As a guideline 20,000,000 BTU/hr at 96% efficiency will produce approximately 2.2 gpm (8.4 L/min).

    Select a Product

    • NC-1
    • NC-1S
    • NC-1W New
    • NC-2
    • NC-2S
    • NT15
    • NT25
    • NT1-P
    • NT25-P18 New
    • NT70-P
  • H20 Demineralizers

    Disposable cartridges are ideal for use on...read more

    H20 Demineralizers

    Disposable cartridges are ideal for use on job specific residential and light commercial water treatment applications. Use the PuroPal Disposable
    series cartridges to provide demineralized water rather than paying a
    premium and/or transporting treated water to site or purchasing preblended glycol solutions. Simply carry the cartridge inside, hook up to the
    site’s water supply with garden hose connections, and begin delivering
    demineralized water through the PuroPal cartridge’s ion-exchange resin.

    PuroPal-1

    ‘PUROPAL’ H2O DEMINERALIZERS

    The ‘PUROPAL’ disposable cartridges are ideal for demineralizing fill water for closed loop hydronic systems. The quality of water, especially when mixed with anti-freeze (glycol), can have an impact on system performance. Marginal water quality can lead to scaling, sediment deposits, accumulation of sludge, and increased corrosion rates.

    FEATURES and BENEFITS

    • Demineralized water meets the strict water quality requirements from boiler and glycol manufacturers
    • Removes all the aggressive salts such as chlorides, sulphates, and nitrates which specifically attack metals like stainless steel, copper, and aluminum
    • Removes scale producing ions like calcium and magnesium that damage components and block heat transfer
    • Lowers electrical conductivity, which reduces corrosion
    • The Puropal-300 media changes from blue to beige when spent
    • An economical and convenient alternative to pre-blended glycol

    PuroPal-1000

    ‘PUROPAL’ H2O DEMINERALIZERS

    The ‘PUROPAL’ disposable cartridges are ideal for demineralizing fill water for closed loop hydronic systems. The quality of water, especially when mixed with anti-freeze (glycol), can have an impact on system performance. Marginal water quality can lead to scaling, sediment deposits, accumulation of sludge, and increased corrosion rates.

    FEATURES and BENEFITS

    • Demineralized water meets the strict water quality requirements from boiler and glycol manufacturers
    • Removes all the aggressive salts such as chlorides, sulphates, and nitrates which specifically attack metals like stainless steel, copper, and aluminum
    • Removes scale producing ions like calcium and magnesium that damage components and block heat transfer
    • Lowers electrical conductivity, which reduces corrosion
    • The Puropal-300 media changes from blue to beige when spent
    • An economical and convenient alternative to pre-blended glycol

    PuroPal Leader

    The ‘PUROPAL LEADER’ is ideal for demineralizing fill water for closed loop hydronic systems. The quality of water, especially when mixed with anti-freeze (glycol), can have an impact on system
    performance. Even marginal water quality can lead to scaling, sediment deposits, and the accumulation of sludge.

    FEATURES and BENEFITS

    • PuroPal Console provides real time data about the incoming and outgoing water quality, flow and total treated demineralized water
    • Single Lever Valve opens/closes flow through the unit to start/stop demineralization, no power supply required
    • Pressure Vessel is built utilizing a fibre reinforced mineral plastic, providing a lightweight yet durable portable vessel
    • A patented fluid flow path through the resin maximizes the capacity of the ion exchange
    • Self-contained cartridge can be replaced in seconds
    • Demineralized water meets the strict water quality requirements from appliance and glycol manufacturers
    • Removes all the aggressive salts such as chlorides, sulphates, and nitrates which specifically attack metals like stainless steel, copper, and aluminum
    • Removes scale producing ions like calcium and magnesium that damage components and block heat transfer
    • Lowers electrical conductivity, which reduces corrosion

    PuroPal Pro-50

    ‘PUROPAL-PRO’ H2O DEMINERALIZERS

    The ‘PUROPAL-PRO’ is ideal for demineralizing fill water for closed loop hydronic systems. The quality of water, especially when mixed with anti-freeze (glycol), can have an impact on system performance. Marginal water quality can lead to scaling, sediment deposits, and the accumulation of sludge.

    FEATURES and BENEFITS

    • Demineralized water meets the strict quality requirements from boiler and glycol manufacturers
    • Removes all the aggressive salts such as chlorides, sulphates, and nitrates which specifically attack metals like stainless steel, copper, and aluminum
    • Removes scale producing ions like calcium and magnesium that damage components and block heat transfer
    • Lowers electrical conductivity, which reduces corrosion
    • Includes conductivity and flow meter
    • Includes isolation valves
    • Portable and easy to use
    • Pressure reducing valve and gauge
    • Ion exchange resin can easily be replaced when spent

    PuroPal Complete-2

    ‘PUROPAL-COMPLETE’ H2O DEMINERALIZERS

    The ‘PUROPAL-COMPLETE’ is ideal for demineralizing fill water for closed loop hydronic systems. The quality of water, especially when mixed with anti-freeze (glycol), can have an impact on system performance. Marginal water quality can lead to scaling, sediment deposits, and the accumulation of sludge.

    FEATURES and BENEFITS

    • Demineralized water meets the strict water quality requirements from boiler and glycol
      manufacturers

    • Removes all the aggressive salts such as chlorides, sulphates, and nitrates which specifically attack metals like stainless steel, copper, and aluminum
    • Removes scale producing ions like calcium and magnesium that damage components and block heat transfer
    • Lowers electrical conductivity, which reduces corrosion
    • Includes conductivity and flow meter
    • Includes ball valves and air vent
    • Easy to install and use

    PuroPal Complete-12/50

    ‘PUROPAL-COMPLETE’ H2O DEMINERALIZERS

    The ‘PUROPAL-COMPLETE’ is ideal for demineralizing fill water for closed loop hydronic systems. The quality of water, especially when mixed with anti-freeze (glycol), can have an impact on system performance. Marginal water quality can lead to scaling, sediment deposits, and the accumulation of sludge.

    FEATURES and BENEFITS

    • Demineralized water meets the strict water quality requirements from boiler and glycol manufacturers
    • Removes all the aggressive salts such as chlorides, sulphates, and nitrates which specifically attack metals like stainless steel, copper, and aluminum
    • Removes scale producing ions like calcium and magnesium that damage components and block heat transfer
    • Lowers electrical conductivity, which reduces corrosion
    • Includes conductivity and flow meter
    • Includes ball valves and air vent
    • Easy to install and use

    PuroPal Meter

    The ‘PUROPAL LEADER’ is ideal for demineralizing fill water for closed loop hydronic systems. The quality of water, especially when mixed with anti-freeze (glycol), can have an impact on system
    performance. Even marginal water quality can lead to scaling, sediment deposits, and the accumulation of sludge.

    FEATURES and BENEFITS

    • PuroPal Console provides real time data about the incoming and outgoing water quality, flow and total treated demineralized water
    • Single Lever Valve opens/closes flow through the unit to start/stop demineralization, no power supply required
    • Pressure Vessel is built utilizing a fibre reinforced mineral plastic, providing a lightweight yet durable portable vessel
    • A patented fluid flow path through the resin maximizes the capacity of the ion exchange
    • Self-contained cartridge can be replaced in seconds
    • Demineralized water meets the strict water quality requirements from appliance and glycol manufacturers
    • Removes all the aggressive salts such as chlorides, sulphates, and nitrates which specifically attack metals like stainless steel, copper, and aluminum
    • Removes scale producing ions like calcium and magnesium that damage components and block heat transfer
    • Lowers electrical conductivity, which reduces corrosion

    Select a Product

    • PuroPal-1 New
    • PuroPal-1000
    • PuroPal Leader
    • PuroPal Pro-50
    • PuroPal Complete-2
    • PuroPal Complete-12/50
    • PuroPal Meter
  • Axi Therm

    Cleaning and protection for closed loop hydronic...read more

    Axi Therm

    Cleaning and protection for closed loop hydronic systems

    Suitable for all kinds of closed loop hydronic heating and cooling systems: traditional hydronic heating systems, chilled water systems, and geothermal systems.

    Features and Benefits

    • Eco-friendly chemicals do not contain harmful or hazardous substances
    • Easy to use. The heating system can be cleaned both with the boiler on or off
    • Neutral pH does not corrode or damage gaskets, plastics, or metals (steel, copper, and aluminium)
    • Keeps the heat exchanger, pipes, and radiators clean
    • Low concentration requirements (0.5 L or 16.9 oz. treats 100 L or 25 U.S. gallons of water. Dosage: 0.5%)
    • Provides energy savings by reducing fuel consumption – A clean heat exchanger is a happy exchanger
    • Restores heat transfer and water circulation to their original levels
    • Reduces maintenance costs. Proper fill and inhibitors lead to longer running systems

    PROTECT – 1

    HYDRONIC SYSTEM CORROSION AND SCALE INHIBITOR

    Suitable for all kinds of hydronic heating and cooling systems: traditional hydronic heating systems, chilled water systems, and geothermal systems.

    FEATURES and BENEFITS

    • Low concentration requirements (0.5 litres or 16.9 oz. treats 100 litres or 25 U.S. gallons of water. Dosage: 0.5%)
    • Neutral pH does not corrode or damage gaskets, plastics, or metals (steel, copper, and aluminum)
    • Eco friendly chemicals do not contain harmful or hazardous substances
    • Keeps the heat exchanger, pipes, and radiators clean
    • Provides energy savings by protecting against corrosion and lime scale
    • Reduces maintenance costs
    • Available in 500 mL (16.9 oz.) and 2 litre (½ U.S. gallon) bottles

     

     

    CLEAN 3

    SYSTEM CLEANER FOR “NEW”
    HYDRONIC SYSTEMS

    Suitable for all kinds of new hydronic heating and cooling systems: traditional hydronic heating systems, chilled water systems, and geothermal systems.

    FEATURES and BENEFITS

    • Low concentration requirements (0.5 litres or 16.9 oz. treats 100 litres or 25 U.S. gallons of water. Dosage: 0.5%)
    • Neutral pH does not corrode or damage gaskets, plastics, or metals (steel,copper, and aluminum)
    • Eco friendly chemicals do not contain harmful or hazardous substances
    • Easy to use, the heating system can be cleaned both with the boiler on or off
    • Provides energy savings by removing oil residue and metal oxides
    • Reduces maintenance costs
    • Available in 500 mL (16.9 oz.) and 2 litres (½ U.S. gallon) bottles

    CLEAN 5

    SYSTEM CLEANER FOR “OLD” HYDRONIC SYSTEMS

    Suitable for all kinds of hydronic heating and cooling systems: traditional hydronic heating systems, chilled water systems, and geothermal systems.

    FEATURES and BENEFITS

    • Low concentration requirements (0.5 litres or 16.9 oz. treats 100 litres or 25 U.S. gallons of water. Dosage: 0.5%)
    • Neutral pH does not corrode or damage gaskets, plastics, or metals (steel,copper, and aluminum)
    • Eco friendly chemicals do not contain harmful or hazardous substances
    • Easy to use, the heating system can be cleaned both with the boiler on or off
    • Provides energy savings by removing sludge and metal oxides
    • Restores heat transfer and water circulation to their original levels
    • Reduces maintenance costs
    • Available in 500 mL (16.9 oz.) and 2 litres (½ U.S. gallon) bottles

    CLEAN 10

    HYDRONIC SYSTEM AND BOILER CLEANER

    High dosage cleaner is for the most troubled systems. Suitable for all kinds of hydronic heating and cooling systems: traditional hydronic heating systems, chilled water systems, and geothermal systems.

    FEATURES and BENEFITS

    • Low concentration requirements (5 litres or 169 oz. treats 100 litres or 25 U.S.gallons of water. Dosage: 5 to 10%)
    • Neutral pH does not corrode or damage gaskets, plastics, or metals (steel,copper, and aluminum)
    • Eco friendly chemicals do not contain harmful or hazardous substances
    • Easy to use, the heating system can be cleaned both with the boiler on or off
    • Provides energy savings by removing limescale, sludge, and metal oxide incrustations inside the boiler and hydronic system
    • Restores heat transfer and water circulation to their original levels
    • Reduces maintenance costs
    • Available in 5 litre (1.3 U.S. gallon) and 20 litres (5.3 U.S. gallon) bottles

    CLEAN BOILER

    WATER SIDE CLEANER

    Removes metal oxides and limescale deposits from the water side of boiler heat exchangers.

    FEATURES and BENEFITS

    • Concentration requirements: 10 litres (338 oz.) treats 100 litres or 25 U.S. gallons of water (Dosage: 10 to 20%).
    • Neutral pH does not corrode or damage gaskets, plastics, or metals (steel,copper, and aluminum)
    • Easy to use, the heating system can be cleaned both with the boiler on or off
    • Provides energy savings and reduces noise by removing metal oxides and limescale from the water side surface of the heat exchanger
    • Restores heat transfer to the original levels
    • Reduces maintenance costs
    • Available in 1 L (33 oz.) bottles

    CLEAN F-STEEL

    BOILER “COMBUSTION SIDE” CLEANER

    Removes even the most stubborn combustion residue from stainless steel and copper heat exchangers.

    FEATURES and BENEFITS

    • Provides energy savings by removing combustion residue from the fire side surface of heat exchangers made from stainless steel in condensing boilers
    • Restores heat transfer to the original levels
    • Each bottle comes with an extended spray nozzle to help with accessing the hard to reach areas in the heat exchanger
    • Security bottle seal
    • No pouring or mixing needed
    • Available in 1 L (33 oz.) bottles

    CLEAN F9-A

    BOILER “COMBUSTION SIDE” CLEANER
    FOR ALUMINUM HEAT EXCHANGERS

    Removes even the most stubborn combustion residue from Aluminum heat exchangers.

    FEATURES and BENEFITS

    • Provides energy savings by removing combustion residue from the fire side surface of heat exchangers made from aluminum in condensing boilers
    • Restores heat transfer to the original levels
    • Easy two-step procedure to clean
    • Each bottle comes with an extended spray nozzle to help with accessing the hard to reach areas in the heat exchanger
    • Child security cap lock
    • Security bottle seal
    • No pouring or mixing needed
    • Package includes two – 1L (33oz.) bottles

    CLEAN F9-AL

    BOILER “COMBUSTION SIDE” CLEANER
    FOR ALUMINUM HEAT EXCHANGERS

    Removes even the most stubborn combustion residue from Aluminum heat exchangers.

    FEATURES and BENEFITS

    • Provides energy savings by removing combustion residue from the fire side surface of heat exchangers made from aluminum in condensing boilers
    • Restores heat transfer to the original levels
    • Easy two-step procedure to clean
    • Each bottle comes with an extended spray nozzle to help with accessing the hard to reach areas in the heat exchanger
    • Child security cap lock
    • Security bottle seal
    • No pouring or mixing needed
    • Package includes two – 1L (33oz.) bottles

    Select a Product

    • PROTECT – 1
    • CLEAN 3
    • CLEAN 5
    • CLEAN 10
    • CLEAN BOILER
    • CLEAN F-STEEL New
    • CLEAN F9-A
    • CLEAN F9-AL
  • System Feeders

    Axiom System Feeders are designed to simplify...read more

    System Feeders

    Axiom System Feeders are designed to simplify the process of maintaining the cold static fluid pressure in closed-loop heating and cooling systems. Having a reservoir of suitable make-up fluid eliminates the need for backflow prevention and helps solve many of the associated problems when using domestic water as a make-up fluid.

    APPLICATIONS: System Feeders are ideal for boiler/chiller systems, snow/ice melt circuits, outside air heating/cooling glycol coils, geothermal and solar heating systems.

    Features and Benefits

    • Automatically maintains a minimum system pressure at a user defined setting
    • Feeders are compatible with both water and glycol/water solutions
    • Provides leak detection – dropping fluid level provides immediate notice that the system is losing fluid
    • Prevents major floods – in the event of a system rupture, only the contents of the tank will be pumped into the system
    • All units plug into any standard 115 VAC outlet
    • Diverter valve allows easy purging of air on initial start-up and manual mixing of fluid in the tank
    • Fluid drained for service from the system can easily be recovered and used to replenish the system following service
    • Fluid level switch shuts the pump off if the storage tank level gets too low
    • Does not require any annual recertification testing

    DMF150

    DMF150 ‘PRESSURE PAL’ DIGITAL MINI SYSTEM FEEDER

    The industry leader for pressurizing closed-loop hydronic systems introduces the newest ‘PRESSURE PAL’ to the Axiom Product Family. The DMF150 utilizes a digital pressure control (0-45 psig) with electronic alert contacts. The tank design incorporates a wall bracket connection that comes standard in the box. Front fill point makes fluid handling a simple process.

    FEATURES and BENEFITS 

    • 17 litre (4.6 US gallon) tank for storage and mixing 
    • All features shown on user friendly digital display screen 
    • 0-45psig Pressure Setpoint with adjustable dead band 
    • N.O./N.C. Alert contacts and LED light enabled when low level, low pressure, or high-pressure condition 
    • Integrated Easy Connect Wall Mount Bracket comes with the unit 
    • Tilted 5” easy fill access on front of tank 
    • UL listed Power supply plugs into any standard 115 VAC outlet 
    • Diaphragm pump can run dry without damage 
    • No direct connection to potable water supply eliminates need for backflow prevention 
    • Make-up fluid stored in the feeder tank can be pre-treated to meet appliance manufacturers specifications 
    • Fluid level switch shuts the pump off and enables alarm contacts if the storage tank level gets too low 
    • Diverter valve allows easy purging of air on initial start-up, and manual mixing of solution 
    • Fluid drained for service can easily be put back into the system 
    • Prevents major floods 
    • Provides leak detection

    MF200

    MODEL MF200 ‘PRESSURE PAL’ MINI SYSTEM FEEDER

    The ‘PRESSURE PAL’ is ideal for feeding and pressurizing closed hydronic systems that do not require cold static fill pressures higher than 170 kPa(25 psig). It is compatible with both water and glycol/water solutions. Perfect for small boiler/chiller systems, snow/ice melt circuits, outside air heating/cooling glycol coils, solar heating systems.

    FEATURES and BENEFITS

    • 25 liter (6.6 US gallon) tank for storage and mixing
    • UL listed Power supply plugs into any standard 115 VAC outlet
    • Diaphragm pump can run dry without damage
    • No direct connection to potable water supply eliminates need for backflow prevention
    • Make-up fluid stored in the feeder tank can be pre-treated
    • Diverter valve allows easy purging of air on initial start-up, and manual agitation of solution
    • Prevents major floods – in the event of system rupture, only the contents of the tank will be pumped into the system
    • Provides leak detection – dropping fluid level provides immediate notice that the system has developed a leak
    • Fluid drained for service can easily be put back into the system
    • Fluid level switch shuts the pump off if the storage tank level gets too low

    DMF300

    DMF300 ‘PRESSURE PAL’ DIGITAL MINI SYSTEM FEEDER

    The industry leader for pressurizing closed-loop hydronic systems introduces the newest ‘PRESSURE PAL’ to the Axiom Product Family. The DMF300 utilizes a digital pressure control (0-45 psig) with electronic alert contacts. Front fill point makes fluid handling a simple process.

    FEATURES and BENEFITS

    • 64 litre (17 US gallon) tank for storage and mixing
    • All features shown on user friendly digital display screen
    • 0-45psig Pressure Setpoint with adjustable dead band
    • N.O./N.C. Alert contacts and LED light enabled when low level, low pressure, or high-pressure condition
    • Tilted 5” easy fill access on front of tank
    • UL listed Power supply plugs into any standard 115 VAC outlet
    • Diaphragm pump can run dry without damage
    • No direct connection to potable water supply eliminates need for backflow prevention
    • Make-up fluid stored in the feeder tank can be pre-treated to meet appliance manufacturers specifications
    • Fluid level switch shuts the pump off and enables alarm contacts if the storage tank level gets too low
    • Diverter valve allows easy purging of air on initial start-up, and manual mixing of solution
    • Fluid drained for service can easily be put back into the system
    • Prevents major floods
    • Provides leak detection

    SF100

    MODEL SF100 PACKAGED HYDRONIC SYSTEM FEEDER

    The SF100 contains everything required to feed and pressurize closed hydronic heating or cooling systems in a neat, simple package that is easy to install and operate. It is compatible with both water and water/glycol solutions.

    FEATURES and BENEFITS

    • 208 litre (55 US gallon) tank for storage and mixing
    • Plugs into any standard 115 VAC outlet
    • Fluid level switch shuts the pump off if the storage tank level gets low
    • Accumulator tank prevents excessive pump cycling
    • No direct connection to potable water supply eliminates need for backflow prevention
    • Make-up fluid stored in the feeder tank can be pre-treated
    • Diverter valve for purging of air on initial start-up and manual agitation of solution
    • Prevents major floods – in the event of system rupture, only the contents of the tank can be pumped into the system
    • Provides leak detection – dropping fluid level provides immediate notice that the system has developed a leak
    • Fluid drained for service can easily be put back into the system
    • Flexible connection hose with system check valve makes installation easy

    SF100-HP

    MODEL SF100-HP PACKAGED HYDRONIC SYSTEM FEEDER HIGH PRESSURE UNIT

    The SF100-HP contains everything required to feed and pressurize closed hydronic heating or cooling systems in a neat, simple package that is easy to install and operate. It is compatible with both water and water/glycol solutions.

    FEATURES and BENEFITS

    • 208 litre (55 US gallon) tank for storage and mixing
    • Plugs into any standard 115 VAC outlet
    • Fluid level switch shuts the pump off if the storage tank level gets low
    • Accumulator tank prevents excessive pump cycling
    • No direct connection to potable water supply eliminates need for backflow prevention
    • Make-up fluid stored in the feeder tank can be pre-treated
    • Diverter valve for purging of air on initial start-up and manual agitation of solution
    • Prevents major floods – in the event of system rupture, only the contents of the tank can be pumped into the system
    • Provides leak detection – dropping fluid level provides immediate notice that the system has developed a leak
    • Fluid drained for service can easily be put back into the system
    • Flexible connection hose with system check valve makes installation easy

    SF100-HP-L

    MODEL SF100-HP-L PACKAGED HYDRONIC SYSTEM FEEDER HIGH PRESSURE LARGE CAPACITY TANK

    The SF100-HP-L contains everything required to feed and pressurize closed hydronic heating or cooling systems in a neat, simple package that is easy to install and operate. It is compatible with both water and water/glycol solutions.

    FEATURES and BENEFITS

    • 383 litre(100 US gallon) tank for storage and mixing
    • Plugs into any standard 115 VAC outlet
    • Fluid level switch shuts the pump off if the storage tank level gets low
    • Accumulator tank prevents excessive pump cycling
    • No direct connection to potable water supply eliminates need for backflow prevention
    • Make-up fluid stored in the feeder tank can be pre-treated
    • Diverter valve for purging of air on initial start-up and manual agitation of solution
    • Prevents major floods – in the event of system rupture, only the contents of the tank can be pumped into the system
    • Provides leak detection – dropping fluid level provides immediate notice that the system has developed a leak
    • Fluid drained for service can easily be put back into the system
    • Flexible connection hose with system check valve makes installation easy

    SF100-UHP

    MODEL SF100-UHP PACKAGED HYDRONIC SYSTEM FEEDER ULTRA HIGH PRESSURE UNITK

    The SF100-UHP contains everything required to feed and pressurize closed hydronic heating or cooling systems in a neat, simple package that is easy to install and operate. It is compatible with
    both water and water/glycol solutions.

    FEATURES and BENEFITS

    • 208 litre (55 US gallon) tank for storage and mixing
    • Plugs into any standard 115 VAC outlet
    • Fluid level switch shuts the pump off if the storage tank level gets low
    • Accumulator tank prevents excessive pump cycling
    • No direct connection to potable water supply eliminates need for backflow prevention
    • Make-up fluid stored in the feeder tank can be pre-treated
    • Diverter valve for purging of air on initial start-up and manual agitation of solution
    • Prevents major floods – in the event of system rupture, only the contents of the tank can be pumped into the system
    • Provides leak detection – dropping fluid level provides immediate notice that the system has developed a leak
    • Fluid drained for service can easily be put back into the system
    • Flexible connection hose with system check valve makes installation easy

    SF100-D

    MODEL SF100-D PACKAGED HYDRONIC SYSTEM FEEDER “DUPLEX UNIT”

    The SF100-D contains everything required to feed and pressurize closed hydronic heating or cooling systems in a neat, simple package that is easy to install and operate. It is compatible with both water and water/glycol solutions.

    FEATURES and BENEFITS

    • Two pumps for seamless and reliable operation
    • 208 litre (55 US gallon) tank for storage and mixing
    • Plugs into any standard 115 VAC outlet
    • Fluid level switch shuts the pump off if the storage tank level gets low
    • Accumulator tank prevents excessive pump cycling
    • No direct connection to potable water supply eliminates need for backflow prevention
    • Make-up fluid stored in the feeder tank can be pre-treated
    • Diverter valve for purging of air on initial start-up and manual agitation of solution
    • Prevents major floods – in the event of system rupture, only the contents of the tank can be pumped into the system
    • Provides leak detection – dropping fluid level provides immediate notice that the system has developed a leak
    • Fluid drained for service can easily be put back into the system
    • Flexible connection hose with system check valve makes installation easy

    SF100-D-P

    MODEL SF100-D-P PACKAGED HYDRONIC SYSTEM FEEDER “DUPLEX UNIT c/w ALTERNATING CONTROL PANEL”

    The SF100-D-P contains everything required to feed and pressurize closed hydronic heating or cooling systems in a neat, simple package that is easy to install and operate. It is compatible with
    both water and water/glycol solutions.

    FEATURES and BENEFITS

    • Two pumps for seamless and reliable operation
    • Alternating panel with Lead/Lag pump operation, High/Low level alarm etc. See specification
    • 208 litre (55 US gallon) tank for storage and mixing
    • Fluid level switch shuts the pump off if the storage tank level gets low
    • Accumulator tank prevents excessive pump cycling
    • No direct connection to potable water supply eliminates need for backflow prevention
    • Make-up fluid stored in the feeder tank can be pre-treated
    • Diverter valve for purging of air on initial start-up and manual agitation of solution
    • Prevents major floods – in the event of system rupture, only the contents of the tank can be pumped into the system
    • Provides leak detection – dropping fluid level provides immediate notice that the system has developed a leak
    • Fluid drained for service can easily be put back into the system
    • Flexible connection hose with system check valve makes installation easy

    SF100-2PRV

    MODEL SF100 PACKAGED HYDRONIC SYSTEM FEEDER

    The SF100 contains everything required to feed and pressurize closed hydronic heating or cooling systems in a neat, simple package that is easy to install and operate. It is compatible with both water and water/glycol solutions.

    FEATURES and BENEFITS

    • 208 litre (55 US gallon) tank for storage and mixing
    • Plugs into any standard 115 VAC outlet
    • Fluid level switch shuts the pump off if the storage tank level gets low
    • Accumulator tank prevents excessive pump cycling
    • No direct connection to potable water supply eliminates need for backflow prevention
    • Make-up fluid stored in the feeder tank can be pre-treated
    • Diverter valve for purging of air on initial start-up and manual agitation of solution
    • Prevents major floods – in the event of system rupture, only the contents of the tank can be pumped into the system
    • Provides leak detection – dropping fluid level provides immediate notice that the system has developed a leak
    • Fluid drained for service can easily be put back into the system
    • Flexible connection hose with system check valve makes installation easy

    Alarm Panel

    Alarm Panel (Model RIA10-1-SAA)

    Alarm panel shall incorporate a power supply cord, pump/alarm relay, power on and alarm indicating lights, alarm buzzer, test switch, silence/off switch, and receptacle for SF100 power supply cord. On a low-level condition the SF100 will be disabled, the alarm will sound and a set of dry contacts will close (for remote indication if connected to a DCS). The alarm buzzer may be disconnected by removing a jumper in the alarm circuit.

    SPECIFICATIONS:

    • Electrical Rating Motors: ¼ hp at 115 Volts/230 Volts
    • Cable: Neoprene, Type SJOW No. 16/2 (7.6 mm Dia.)
    • Temperature: 140° F (60° C)
    • Panel Dimensions: 260mm (10.2 in) x 128mm (5.03 in) x 92mm (3.62 in).
    • Alarm Panel Enclosure Rating: NEMA 1

    Select a Product

    • DMF150
    • MF200
    • DMF300
    • SF100
    • SF100-HP
    • SF100-HP-L
    • SF100-UHP
    • SF100-D
    • SF100-D-P
    • SF100-2PRV
    • Alarm Panel
  • SFP / CBF

    Hydronic Sidestream Filter Packages deliver effective ongoing...read more

    SFP / CBF

    Hydronic Sidestream Filter Packages deliver effective ongoing protection against the damaging effects of debris in all types of closed-loop hydronic systems. Ensuring the fluid in a closed-loop hydronic system is clean helps reduce overall maintenance and operating costs of the system. Monitoring and maintaining clean hydronic system fluid is now simple and convenient.

    Features

    • Brass and stainless-steel construction
    • Manual balancing valve incorporates flow balancing with memory stop, filter cartridge isolation and an integral manual air vent
    • Comes with standard DOE 25 micron cotton wound filter cartridge
      • 5 and 10 micron filter options available
    • Filter Housing uses a double O-ring for reliable leak-free use
      • Includes ball valve drain valve with hose connection to ensure safe, mess free fluid handling
      • ICan be used for chemical dosing up to 0.8 USG (3.0L)

    SFP-10

    SFP SERIES SIDESTREAM FILTER PACKAGE

    Axiom’s Hydronic Sidestream Filter Package delivers effective ongoing protection against the damaging effects of debris in all types of heating and cooling systems.Monitoring and maintaining clean hydronic system fluid has never been easier.

    FEATURES and BENEFITS

    • Double O-ring on filter housing for reliable leak free cartridge replacements
    • Ball valve drain with hose connection and cap ensures safe fluid handling
    • Buoyant TPX ball movement can be seen at low flow rates less than 1 gpm
    • Comes with standard DOE 25 micron cotton wound filter cartridge (5 micron filters available)
    • Two tempered borosilicate glass windows gives better fluid visibility
    • Manual balance valve provides flow metering, flow balancing with memory stop and filter cartridge isolation. Integral manual air vent prevents the introduction of air during cartridge change
    • Filter vessel can be used for chemical dosing. Up to 0.8 Gallon (3.0 litre)
    • Brass and stainless steel construction
    • Reduces equipment maintenance cost and extends system life

    SFP-20

    SFP SERIES SIDESTREAM FILTER PACKAGE

    Axiom’s Hydronic Sidestream Filter Package delivers effective ongoing protection against the damaging effects of debris in all types of heating and cooling systems.Monitoring and maintaining clean hydronic system fluid has never been easier.

    FEATURES and BENEFITS

    • Double O-ring on filter housing for reliable leak free cartridge replacements
    • Ball valve drain with hose connection and cap ensures safe fluid handling
    • Buoyant TPX ball movement can be seen at low flow rates less than 1 gpm
    • Comes with standard DOE 25 micron cotton wound filter cartridge (5 micron filters available)
    • Two tempered borosilicate glass windows gives better fluid visibility
    • Manual balance valve provides flow metering, flow balancing with memory stop and filter cartridge isolation. Integral manual air vent prevents the introduction of air during cartridge change
    • Filter vessel can be used for chemical dosing. Up to 0.8 Gallon (3.0 litre)
    • Brass and stainless steel construction
    • Reduces equipment maintenance cost and extends system life

    FH-10

    FH SERIES FILTER HOUSING

    Axiom’s Hydronic Filter Housing delivers effective ongoing protection against the damaging effects of debris in all types of heating and cooling systems. Maintaining a clean hydronic system fluid has never been easier.

    FEATURES and BENEFITS

    • Double O-ring on filter housing for reliable leak free cartridge replacements
    • Ball valve drain with hose connection and cap ensures safe fluid handling
    • Filter vessel can be used for chemical dosing. Up to 0.8 Gallon (3.0 litre)
    • Stainless Steel construction
    • Reduces equipment maintenance cost and extends system life

    FH-20

    FH SERIES FILTER HOUSING

    Axiom’s Hydronic Filter Housing delivers effective ongoing protection against the damaging effects of debris in all types of heating and cooling systems. Maintaining a clean hydronic system fluid has never been easier.

    FEATURES and BENEFITS

    • Double O-ring on filter housing for reliable leak free cartridge replacements
    • Ball valve drain with hose connection and cap ensures safe fluid handling
    • Filter vessel can be used for chemical dosing. Up to 0.8 Gallon (3.0 litre)
    • Stainless Steel construction
    • Reduces equipment maintenance cost and extends system life

    ASFI-075

    ASFI SERIES SIGHT FLOW INDICATOR

    FEATURES and BENEFITS

    • Mounts in any orientation
    • Each sight flow indicator is inspected and pressure tested
    • Double window
    • Buoyant TPX ball movement can be seen at flow rates less than 1 GPM

    ASFI-100

    ASFI SERIES SIGHT FLOW INDICATOR

    FEATURES and BENEFITS

    • Mounts in any orientation
    • Each sight flow indicator is inspected and pressure tested
    • Double window
    • Buoyant TPX ball movement can be seen at flow rates less than 1 GPM

    CBF-2

    CBF SERIES CHEMICAL BY-PASS FEEDER (POT FEEDER)

    Axiom’s Chemical By-Pass Feeder delivers chemicals to any closed loop system. Maintaining a chemically balanced hydronic system has never been easier.

    FEATURES and BENEFITS

    • Allows for safe and easy chemical dosing.
    • Ball valves for easy chemical dosing and pot feeder isolation
    • Graduated funnel with stainless steel filter for clean, accurate, and mess free chemical addition
    • Pressure vessel and fittings made with brass and Carbon steel
    • 2 Gallon (7.6 litre) and 5 Gallon (18.9 litre) models available
    • Wall bracket available for 2 Gallon (7.6litre) model
    • 5 Gallon (18.9L) model comes with adjustable steel legs.

    CBF-5

    CBF SERIES CHEMICAL BY-PASS FEEDER (POT FEEDER)

    Axiom’s Chemical By-Pass Feeder delivers chemicals to any closed loop system. Maintaining a chemically balanced hydronic system has never been easier.

    FEATURES and BENEFITS

    • Allows for safe and easy chemical dosing.
    • Ball valves for easy chemical dosing and pot feeder isolation
    • Graduated funnel with stainless steel filter for clean, accurate, and mess free chemical addition
    • Pressure vessel and fittings made with brass and Carbon steel
    • 2 Gallon (7.6 litre) and 5 Gallon (18.9 litre) models available
    • Wall bracket available for 2 Gallon (7.6litre) model
    • 5 Gallon (18.9L) model comes with adjustable steel legs.

    CBF-2-SS

    CBF SERIES CHEMICAL BY-PASS FEEDER (POT FEEDER)

    Axiom’s Chemical By-Pass Feeder delivers chemicals to any closed loop system. Maintaining a chemically balanced hydronic system has never been easier.

    FEATURES and BENEFITS

    • Allows for safe and easy chemical dosing.
    • Ball valves for easy chemical dosing and pot feeder isolation
    • Graduated funnel with stainless steel filter for clean, accurate, and mess free chemical addition
    • Pressure vessel and fittings made with brass and Carbon steel
    • 2 Gallon (7.6 litre) and 5 Gallon (18.9 litre) models available
    • Wall bracket available for 2 Gallon (7.6litre) model
    • 5 Gallon (18.9L) model comes with adjustable steel legs.

    CBF-2-HP

    CBF-HP SERIES CHEMICAL BY-PASS FEEDER (POT FEEDER)

    Axiom’s Chemical By-Pass Feeder delivers chemicals to any closed loop system. Maintaining a chemically balanced hydronic system has never been easier.

    FEATURES and BENEFITS

    • Allows for safe and easy chemical dosing.
    • Ball valve for easy chemical dosing and pot feeder isolation
    • Wide opening for adding dry chemical
    • Graduated funnel with stainless steel filter for clean, accurate, and mess free chemical addition
    • Pressure vessel and fittings made with brass and Carbon steel
    • 2 Gallon (7.6 litre) and 5 Gallon (18.9 litre) models available
    • Wall bracket available for 2 Gallon (7.6litre) model
    • 5 Gallon (18.9L) model comes with adjustable steel legs.

    CBF-5-HP

    CBF-HP SERIES CHEMICAL BY-PASS FEEDER (POT FEEDER)

    Axiom’s Chemical By-Pass Feeder delivers chemicals to any closed loop system. Maintaining a chemically balanced hydronic system has never been easier.

    FEATURES and BENEFITS

    • Allows for safe and easy chemical dosing.
    • Ball valve for easy chemical dosing and pot feeder isolation
    • Wide opening for adding dry chemical
    • Graduated funnel with stainless steel filter for clean, accurate, and mess free chemical addition
    • Pressure vessel and fittings made with brass and Carbon steel
    • 2 Gallon (7.6 litre) and 5 Gallon (18.9 litre) models available
    • Wall bracket available for 2 Gallon (7.6litre) model
    • 5 Gallon (18.9L) model comes with adjustable steel legs.

    Select a Product

    • SFP-10
    • SFP-20
    • FH-10
    • FH-20
    • ASFI-075
    • ASFI-100
    • CBF-2
    • CBF-5
    • CBF-2-SS
    • CBF-2-HP
    • CBF-5-HP
  • PEX Pal

    PEX-Pal tubing bends safely collect and organize...read more

    PEX Pal

    PEX-Pal tubing bends safely collect and organize in-floor tubing used in
    high-mass radiant floor heating installations.


    Features

    • Units are designed as modular blocks that quickly and easily snap together to match the number of loops on the manifold
    • Two-channel design positions both the supply and return piping with the appropriate spacing required for connections to the manifold
    • Modules are constructed of a high impact strength plastic suitable to be embedded in a concrete slab
    • Enclosed design protects the tubing at the poured-floor surface
    • Modules are designed to connect together with outlets orientated in
      opposite directions for manifold applications located on interior walls
      accommodating piping to be routed in opposite directions
    • Can be easily secured in place to available decking, rebar, ready-rod,
      temporary manifold support or wooden forms prior to concrete being
      poured
    • Designed to maintain manufacturers recommended minimum bend radius
      for ¾” and smaller diameter plastic piping

    Tubing Organizer Module

    The ‘PEX Pal’ is a tubing collector and organizer for radiant heating in-floor installations. The modular two-channel design positions the supply and return pipes at the correct spacing required for connection to the manifolds.

    FEATURES and BENEFITS

    • Fast, organized, and cost-effective
    • Mounts to decking, rebar, ready-rod, temporary manifold support, or wooden forms
    • Modular design allows the installer to add as many zones as required
    • Each module is easily press-fit together
    • Maintains a larger bend radius than the manufacturers’ recommended minimum for ¾” and smaller PEX tubing
    • Constructed of high impact strength plastic

    EP 10 End Plates

    The EP 10 end plates are used to finish a group of PEX Pal individual modules.

    FEATURES and BENEFITS

    • Each PEX Pal module supports the supply and return pipe for one zone
    • On overpour applications, 2 pipes may be inserted through the bottom opening
    • Line up each module in the proper orientation and firmly press them to flush together
    • Add the end plate if one of the open sides remain exposed
    • Fast, organized and cost effective
    • Mounts to decking, rebar, ready-rod, temporary manifold support or wooden forms
    • Push the free end of the tubing through the channel guide on the PEXpal and connect it to the supply manifold

    Select a Product

    • Tubing Organizer Module
    • EP 10 End Plates
  • Hydro NODE

    The Hydro-NODE is an easy connect bracket...read more

    Hydro NODE

    The Hydro-NODE is an easy connect bracket designed to mount critical hydronic system components at a convenient location.

    Features

    • Securely mount critical hydronic components
    • Provides means for easy servicing of expansion tank
    • Powder-coated for professional finish

    HN-1

    Axiom introduces the Hydro-NODE, an easy connect bracket designed to mount critical hydronic system components into a convenient central point. Designed for use on closed-loop hydronic systems, the Hydro-NODE is the convenient solution to providing an organized solution for critical component connections.

    HN-2

    Axiom introduces the Hydro-NODE, an easy connect bracket designed to mount critical hydronic system components into a convenient central point. Designed for use on closed-loop hydronic systems, the Hydro-NODE is the convenient solution to providing an organized solution for critical component connections.

    Select a Product

    • HN-1
    • HN-2