Select Page

Specialty Products For Hydronic Systems

Use the calculator below to determine which System Feeder will best suit your application.

Déterminez quel alimentateur convient le mieux à votre application au moyen du calculateur suivant.

Feeder Sizer

Dimensionnement de l’alimentateur

System Details:

Détails du système:

Back to Category

System Feeders

Model SF100-D-2PRV Packaged Hydronic System Feeder

The SF100-D-2PRV contains everything required to feed and pressurize two closed hydronic heating or cooling systems in a neat, simple package that is easy to install and operate.  It is compatible with both water and water/glycol solutions.

  • Features and Benefit

 

  • 208 litre (55 US gallon) tank for storage and mixing
  • Two pumps for seamless and reliable operation
  • Two pressure reducing valve, pressure gauge, system connector hose and check valves to allow for independent pressure supply to isolated systems
  • Plugs into any standard 115 VAC outlet
  • Fluid level switch shuts the pump off if the storage tank level gets low
  • Accumulator tank prevents excessive pump cycling
  • No direct connection to potable water supply eliminates need for backflow prevention
  • Make-up fluid stored in the feeder tank can be pre-treated
  • Diverter valve for purging of air on initial start-up and manual agitation of solution
  • Prevents major floods – in the event of system rupture, only the contents of the tank can be pumped into the system
  • Provides leak detection – dropping fluid level provides immediate notice that the system has developed a leak
  • Fluid drained for service can easily be put back into the system
  • Flexible connection hose with system check valve makes installation easy